 |
|
| If you can't view the Datasheet, Please click here to try to view without PDF Reader . |
|
|
|
| If you can't view the Datasheet, Please click here to try to view without PDF Reader . |
|
|
| Datasheet File OCR Text: |
| This component is RoHS compliant OPI 2000 High Speed Opto Isolator Pb The OPI 2000 High Speed Optically Coupled Isolator consists of a High Speed Infrared emitter coupled to a silicon photo I.C. The unit is designed for applications requiring high voltage isolation between input & output meeting ATEX requirements. * Surface Mount configuration available . * 10KV isolation * High Speed 2Mb/sec. * Low Propagation Delay ALSO AVAILABLE IN THIS SERIES:OPI2000M ATEX CERTIFIED SURFACE MOUNT OPI2000MK INTEGRAL ELECTROMAGNETIC EARTHED SCREEN OVER SENSOR FOR HIGH COMMON MODE REJECTION MECHANICAL DATA +0.2 21.65 0 6.65 9.25 3.0 EMITTER 0.4 18.05 +0.2 0 SENSOR 0.5 +0.2 0 2.54 1.91 1.91 An Gnd TOP VIEW Vout Vcc 1.91 1.91 2.54 K BEDFORD OPTO TECHNOLOGY LTD 1,BIGGAR BUSINESS PARK, BIGGAR,LANARKSHIRE, ML12 6FX Tel: +44 (0) 1899 221221 Fax: +44 (0) 1899 221009 Website: bot.co.uk E-mail: bill@bot.co.uk 29.11.07 ISS C OPI 2000 ABSOLUTE MAXIMUM RATINGS (25OC unless otherwise noted) INPUT DIODE FORWARD DC CURRENT REVERSE DC VOLTAGE POWER DISSIPATION OUTPUT IC MAX SUPPLY VOLTAGE POWER DISSIPATION OPERATING TEMP STORAGE TEMP INPUT-TO-OUTPUT ISOLATION VOLTAGE LEAD SOLDERING TEMP 2mm from body 5 secs max 100mA 5 Volts 150mW (ii) 7 Volts 165mW -40OC TO +70OC -40OC TO +85OC + 10KV DC (i) 260OC i) ii) Measured with the input leads and output leads shorted together for one min. Thermal resistance 450 K/W Whilst the devices are capable of operating continually at the noted elevated temperatures users should be aware of the possibility of the need to increase the diode current to trigger the device over long periods at high temperatures & currents. CIRCUIT Vgen + + RL C GND Vout Vcc Rf RL =560 ohm C=0.01uF Tel: +44 (0) 1899 221221 Fax: +44 (0) 1899 221009 Website: bot.co.uk E-mail: bill@bot.co.uk 29.11.07 ISS C BEDFORD OPTO TECHNOLOGY LTD 1,BIGGAR BUSINESS PARK, BIGGAR,LANARKSHIRE, ML12 6FX OPI 2000 OPTO ELECTRONIC DATA (TA = 25OC) PARAMETER INPUT DIODE Forward Voltage Reverse Voltage OUTPUT IC ( Vcc=4.75 to 5.25 ) High level Output Current Low Level Output Voltage SYMBOL MIN TYP MAX UNITS TEST CONDITIONS VF VR 5.0 1.35 - 1.6 - V V If=100mA tp=20mS Ir = 100uA ICH - 100 0.6 uA V Ic = 10 uA VOL IF=10mA IOL=2.6mA High Level Supply Current Low Level Supply Current ICCH ICCL 15 18 mA mA IF=0 IF=10mA COUPLED(Vcc=5volts) Propagation Delay to Low Output Propagation Delay to High Output tPLH tPHL 800 800 nSecs nSecs RL=560ohms C=0.01uF ditto OPTO ELECTRONIC SOLUTIONS BEDFORD OPTO TECHNOLOGY LTD 1,BIGGAR BUSINESS PARK, BIGGAR LANARKSHIRE, ML12 6FX Tel: +44 (0) 1899 221221 Fax: +44 (0) 1899 221009 Website: bot.co.uk E-mail: bill@bot.co.uk 29.11.07 ISS C |
Price & Availability of OPI2000
 |
|
|
|
|
All Rights Reserved © IC-ON-LINE 2003 - 2022 |
| [Add Bookmark] [Contact Us] [Link exchange] [Privacy policy] |
|
Mirror Sites : [www.datasheet.hk]
[www.maxim4u.com] [www.ic-on-line.cn]
[www.ic-on-line.com] [www.ic-on-line.net]
[www.alldatasheet.com.cn]
[www.gdcy.com]
[www.gdcy.net] |